digitizing records 101

tripledouble

New member
Nov 2, 2003
7,620
0
1
ok, my apologies for the technologically primitive query...

what is the simplest, most trustworthy way to digitize vinyl?
i got two technics, vestax mixer, a receiver and a new laptop.
do i need programs? do i need to go to radio shack?
i'm ready to vault out of the stone ages.
 
Plug in all your shit normally. Take the mixer output and plug it into the "Aux" input of your receiver. Play your decks and it should sound good through cans or speakers. Take a cable from the "tape out" or "record out" of the receiver into the audio input of your laptop. Done. Hooked up and in.





Now you need audio recording software like Garage Band, or free stuff like this here :


http://www.macmusic.org/software/view.php/lang/en/id/316/Final-Vinyl





This will capture your audio (digitize it) as you start and stop the software.. You'll have to cut up the sides with the software to make individual songs, or keep side-long files as one track. In some programs like Garage Band you can easily add compression, reverb, bass, treble etc. and chop the shit out of the track any which way.





Hope this boils it down.
 
what it says above me, but i've found the simplest program to use is audacity, and its free. I've showed everyone from ex girlfriends to aunts how to use it, its verrrrry user friendly and sounds great for me.
 
1. Make sure you out puts are all set to around 7out of 10 so you get a full sound with out any clipping


2. If you have it or can get a "demo" copy of Logic Pro I would suggest using that as you have some great options when bouncing down ie tags, bit rate and it will dump bounces directly into itunes.


3. Do not under estimate how important said tags are, my preference at the moment is to bounce everything at 320bit mp3, tha way it is as close to wav as you need, but you can still track all your songs very easily (if you tag them)